How to Clean a Shark Vacuum and Why You Should (2026)

Trying to make the most of clean shark vacuum why? You are in the right place. Below we break it down in plain English, with practical tips you can actually use.

Key Takeaways

• I’m pretty sure you know by now just how much I love my Shark vacuum cleaner.
• And given my readers’ letters and comments, I know many of you have Shark Vacuums, too. It’s super important that you know how to...
• I love your messages.

I’m pretty sure you know by now just how much I love my Shark vacuum cleaner. And given my readers’ letters and comments, I know numerous of you have Shark Vacuums, too. It’s super key that you know how to clean any vacuum, especially a Shark, to ensure it keeps performing at top efficiency both now and for numerous years to come!

I love your messages. They make me smile because I understand the range of emotions that comes with using a Shark vacuum for the first time, from amazement to flat-out embarrassment.

Where on earth did all of this dirt and debris come from? I can’t believe what’s been lurking in my carpet!

With all the miles I’ve put on my numerous Shark vacs over the years, I’ve never had one fail. And while the manufacturer boasts that Sharks never lose suction, that is predicated on common sense and regularly cleaning Sharky’s canister, filters, rotating brush, and handle hose.

Here’s a current offering from Amazon for a top of the line Shark Navigator Professional Apex Powered Lift-Away model (there are  numerous!)

Shark AZ1002 Apex Powered Lift-Away Upright Vacuum with DuoClean & Self-Cleaning Brushroll, Crevice Tool, Upholstery Tool & Pet Power Brush, for a Deep Clean on & Above Floors, Espresso

Purchase on Amazon

Contents

You’ll know it’s time when … 

Step 1: Disassemble

Step 2: Clear obstructions

Step 3: Scrub canister clean

Step 4: Shark vacuum filter cleaning

Step 5: Untangle the roller brush

Step 6: De-gunk handle hose

Step 7: Reassemble

FAQs

Signs a Shark vacuum needs cleaning

• Loss of suction: It happens. A big fat hairy fuzzball or a venerable filter that’s stopped filtering can clog a vacuum and cut off suction. Whatever the cause, a loss of suction is the first sign that someone needs a good cleaning.

• Visible dirt left behind: When working at peak performance, a Shark vacuum will never leave behind a trail of crumbs and debris. If it does, it clearly indicates it needs to be cleaned.

• Weird sound: You’ll know it’s bathtime for sure if your Shark sounds like it is gasping for air. That’s because it is. And that can be very hard on the vacuum’s motor.
• Unpleasant odor: A Shark vacuum should never give off a stinky, dirty odor. If it does, consider that a clear sign this vacuum is overdue for a good cleaning.

How to clean a Shark vacuum

In the more than 12 years I’ve been using Shark vacuums, the company has come out with a crazy number of models. However, my experience is that all Shark vacuums have the same basic parts and operate similarly.

What follows are general instructions. Your particular Shark model may vary. If you get stuck, ask in the comment area below, or refer to your owner’s manual.

What you’ll need

✅ warm water

✅ dishwashing liquid

✅ cleaning cloth

✅ wood skewer or similar

✅ flashlight

✅ soft brush like a bottle brush

✅ scissors

Step 1: Disassemble

Make sure the vacuum is disconnected from power, then take it apart. Don’t go crazy here. We’re not talking about removing screws or detaching wires. Remove the dust canister,  the foam/felt filters, the HEPA filter and its cover, and the handle hose.

Take note of the placement of the filters so that you can replace them in the same proper order. It’s not difficult. Just pay attention.

Step 2: Check for and clear obstructions

Check every opening. You’re likely to see fuzz, hairballs, and clinging dust. You may find other things like a Lego brick or maybe even a sock!

Remove all obstructions using your hand or a damp microfiber cloth. Can’t reach it? A wooden skewer works well to fish out or release any weird accumulation.

 

Pro Tip

Make sure you are working in a well-lit area and using a flashlight to help search for blockages.

 

Step 3: Empty and clean the dirt canister

Open both ends of the dirt canister over a trash can and dump out whatever is in there. Now take the canister to a sink of warm soapy water.

Open both ends of the dust canister and put it right into that warm bath. Using a long-handled brush or a rag, get inside that canister and scrub it clean. Once rinsed, dry it thoroughly with a good microfiber cloth.

• MORE: So Disgusting I’m Embarrassed to Tell

 

Step 4: Shark vacuum filter cleaning

Shark vacuums have an excellent filter system consisting of one or two (depending on the model) thick foam filters plus one made of felt; and a HEPA filter. 

Foam/Felt Filters

Rinse the foam and felt filters in cool, clear water (manufacturer recommends no soap), being especially careful not to damage them.

It takes a good amount of squeezy and scrubbing of the foam filter to get it clean. Once cleaned and rinsed well, the filter(s) may or may not return to their new white appearance. But don’t worry. As long as they are not torn, broken, or otherwise disintegrated, they’ll be just fine, even if they remain stained.

NOTE: The manufacturer does not recommend washing the felt filter. I’m not too fond of dirty felt, so I carefully hand wash and have done so numerous times with no problem. Do this at your own risk.

HEPA Filter

Most Shark vacuum models have an additional filter, a HEPA filter. This is located on the lower front of the machine behind the filter grill (door). Firmly pull the door off to reveal the HEPA filter and pull out the filter. Rinse the filter well in clear water and allow it to dry fully.

Do not return the filter(s) to the vacuum at this point. They must be completely dry first or prepare for mildew and mold, the last thing you ever want growing inside a vacuum. Set the still-wet filter(s) on the counter so they can air dry. This may require an overnight stay.

• MORE: The Best Way to Vacuum Carpet is to Memorize this Routine

 

Step 5: Clean the rotating brush head

Next, lay the vacuum on the floor to see the rotating brush. You may want to place a bag or towel underneath to catch the debris and dirt you’re about to release.

You will likely see strings, hair, and other material wrapped around the brush. This is normal. I use scissors to cut through whatever has wound itself around the brush. That makes it simple to clean up the brush. You may have to pull and tug a bit, but it will come off. You want to return the rotating brush to its nice-and-clean condition.

 

Step 6: Clean the handle hose

Again, since I am not privy to every Shark model, please check your owner’s manual before cleaning the vacuum handle hose. You want to make sure the hose on your model has no electrical components. None of my Shark vacuums ever have, but let’s make sure.

The handle hose on a Shark disconnects easily. When you do this and look inside, you’ll see that it is laden with sticky dust and grime. Removing all of that will help your Sharky to continue to perform smoothly.

Take the hose to your sink or tub of soapy water and drop it in so it can fill with water. Using a brush or rag, reach into the ends to clean it. Warning! Don’t get anything get stuck, especially in that bendy part.

Allow the hose to sit and soak for a while to loosen the grime in the areas you cannot reach easily. Finish by running clean water from a faucet through the hose until it comes out clean and clear from the other end. Find a place to hang the hose vertically so it can drip dry.

• MORE: How to Clean Carpet Even if It’s Old, Stained, and Disgusting

 

Step 7: Reassemble the vacuum

Once the filters and handle hose are completely dry, reassemble your Shark vacuum. 

Replace the felt filter first. Next, replace the clean foam filter on top of the felt filter. Replace the HEPA filter and then the “grill” cover. Reattach the handle hose. Close both ends of the dirt canister and lock it into place.

Enjoy your nice clean, fresh Shark Vac!

FAQs

Why does my vacuum smell?

More than likely, you are not emptying the dirt canister frequently enough. Just think about what goes inside that dirt canister and gets trapped in the filters. It’s dirt and debris from the outdoors, bits of food, and other organic matter. Allowing that debris to remain in the dirt canister creates a breeding ground for bacteria and mold and the potential for a stinky situation.

How frequently should I clean a Shark vacuum and filters?

Final Thoughts

The bottom line: a little research on clean shark vacuum why goes a long way. Compare your options, watch for seasonal offers, and never pay full price when a better deal is one click away.

Originally published at everydaycheapskate.com.